当前位置:首页 > support > ICHIB-C1-En > 正文内容

XFP optical transceiver reads the firmware

The hardware device in this demonstration is 10G-XFP-SR

All XFP packaged fiber modules can be used for reference

After the software opens, log in.

Perform the following steps:

1) Select XFP Tab

2) Page size, set to :8(This value is usually 8, but there are exceptions that vary depending on the IC. If reading fails, consult the module vendor)

3) Set the IIC read rate to :1(This value is filled in according to the usage, the smaller the value, the faster the larger the slower, we have tried to fill in 0)

4) Select the firmware address section that you want to read(XFP can usually be selected all, unless there is no DDM fiber module)

Note: To save the firmware locally, you must check "Tab1"

5) If multiple optical fiber modules are read, select "Auto". Then click on "Read".

11.png

6) If the read was successful, the "log" field will display "Read success"(If the read fails, watch another video)

7) If "Local Save" is checked, the firmware will be saved to the specified location, see the "Description.txt" file in the software root directory for the location

8) The read firmware content is displayed in the HEX control(Or view it with another third professional HEX editor)

image.png

3 2 READ SFP.png6.png



扫描二维码推送至手机访问。

版权声明:本文由IICHIB发布,如需转载请注明出处。

本文链接:https://ichib.com/post/59.html

分享给朋友:

“XFP optical transceiver reads the firmware” 的相关文章

"Configuration" Details ICHIB-C1

"Configuration" Details ICHIB-C1

This setting is explained in two parts :" Read and write"1, the parameter used when reading1:page size(The SFF protocol requires the value t...

QSFP-DD optical module Read Digital Diagnostic Monitoring(DDM/DOM)

QSFP-DD optical module Read Digital Diagnostic Monitoring(DDM/DOM)

The hardware device in this demonstration is QSFP-DD-200G-SR4All XFP packaged fiber modules can be used for referencePrepare multi-mode optical fiber...

Retrieve the optical module password-Password management capabilities for ICHIB-C1

Retrieve the optical module password-Password management capabilities for ICHIB-C1

Retrieve Password: Go through a series of steps or verification methods to get a lost or forgotten password.How did this feature come about? I have a...

Optical module coding illustrated tutorial - English (continuous update)

This manual is applicable to ICHIB-X1 and X2 series (ICHIB-X1 series only has read and write code function, and cannot realize laser operation and DDM...

SFP optical module (Writing firmware  information tutorial)

SFP optical module (Writing firmware information tutorial)

The hardware device in this demonstration is 1.25G-SFP-SXAll SFP packaged fiber modules can be used for referenceAfter the software opens, log in.Perf...

Firmware File Merge - Toolkit [Batch Merge Optical module firmware code files]

Firmware File Merge - Toolkit [Batch Merge Optical module firmware code files]

1 case:Prepare 2 folders with the same amount of firmware and file names (order A to B, multiple files and merging between multiple files)Drag folders...