1) First load or customize firmware content
2) Check "Read/Write Options" to generate options (maximum 512 bytes)
3) Import the serial number file (txt file only) from the specified number in Write Options.
For example:
SX10000
SX01001
SX0100001
SX03001010
4: Click Bin to generate
The files are saved under the ICHIB-C1\BinTools folder
The hardware device in this demonstration is 10G-XFP-SRAll XFP packaged fiber modules can be used for referenceAfter the software opens, log in.Perfor...
1) Put the firmware and a file named "list.txt" in a folder, and write the firmware list to the list.txt file (note that the firmware file n...
This setting is explained in two parts :" Read and write"1, the parameter used when reading1:page size(The SFF protocol requires the value t...
The four open buttons in the local file selection correspond to the hexadecimal editor. (After the file is imported, it can be edited and used. You ca...
The hardware device in this demonstration is QSFP-DD-200G-SR4All XFP packaged fiber modules can be used for referencePrepare multi-mode optical fiber...
The hardware device in this demonstration is 40G-QSFP-SRAll QSFP packaged fiber modules can be used for referencePrepare multi-mode optical fiber modu...