SFP, QSFP-DD, OSFP Fiber Optic Programmers & Tools | IICHIB

IICHIB Optical Module Firmware Programmer Android Version Released

Mon, 23 Mar 2026 11:36:05 +0800

- One‑click automatic continuous read/write - One‑click automatic continuous DDM reading ## Requirements Your phone must support OTG and reverse charging of **5V ≥ 500mA**. Please check your device specs before use. ## Warning Insufficient power supply may damage your phone, programmer, or optical module. ## Compatibility Fully tested with SFP optical modules. Works well on **entry‑level phones with chips like Snapdragon 845**. Compatible with power supply up to about 2W. ## Download Supports auto Chinese/English recognition https://www.iichib.com/download/app-release.apk 我可以再帮你做成**更短、一行式广告版**，适合发朋友圈/论坛，要不要？

Optical Module Programmer - Supports SFP/CSFP/QSFP/QSFP - DD/OSFP/OSFP - RHS [New Product Launch]

Thu, 09 Oct 2025 11:44:20 +0800

# 3rd-Gen Optical Module Programmer Mainboard - Product Specifications - **Up to 5x Faster Than the Previous Generation**: The 3rd-generation optical module programmer mainboard delivers a maximum speed boost of 5 times compared to its predecessor, significantly enhancing programming efficiency. - **Support for Low-Power Mode Interface Boards**: Compatible with X3 series expansion boards, and also backward compatible with X2 series expansion boards for versatile application scenarios. - **Support for "Verify Write - Enhanced" in IICHIB-C1 Software**: Enables advanced write verification functionality in the IICHIB-C1 software, ensuring higher data accuracy during programming. - **Dual Type-C Simultaneous Power Supply**: Each Type-C port supports a maximum input of 5V 3A, providing stable and flexible power options. - **DC Power Supply with Power Detection**: Supports DC power input (maximum 5V 10A). When using a DC power source, the Type-C ports will only function for data transmission. - **3 Interface Board Expansion Ports**: Each port supports a maximum output of 3.3V 10A (current output depends on input current), facilitating connection with multiple external devices. - **UART Serial Port Support**: Equipped with UART serial port for reliable serial communication, suitable for debugging and data transmission. - **5V Power Supply Support**: Compatible with 5V power input, meeting common power supply requirements in various working environments.

SFP,SFP+,SFP28,SFP56/XFP/QSFP+,28,56,112/QSFP-DD/OSFP,OSFP-RHS Programmer N-in-1 Universa

Mon, 28 Apr 2025 08:48:43 +0800

IICHIB’s SFP/XFP/QSFP three-in-one universal cloud encoder is a small metal box that can read or write the internal EEPROM of SFP, SFP+,SFP28,SFP56, QSFP,QSFP28,QSFP56,QSFP112,QSFP-DD,OSFP,OSFP-RHS pluggable optical modules, and display the EEPROM details (such as model number, supplier name, description and range).

Supports SFP, SFP+, SFP28,56,QSFP+ and QSFP28,56,112,QSFP-DD,OSFP,OSFP-RHS modules
Friendly Graphical User Interface (GUI)
5V DC power supply(Max 5V10A)
Small full metal case
Mini USB connection
Driver free
Detachable and replaceable hardware design(SFP,SFP-DD,XFP,QSFP,QSFP-DD,OSFP)Expansion board
GUI operating environment: Win32,64 ALL and WinARM64

ascentoptics Comparative evaluation of transceiver module programmer

Thu, 14 Nov 2024 14:50:30 +0800

IICHIB-X2 Transceiver ProgrammerUS$50.00 ++

The IICHIB-X2 development board and the IICHIB-C1 optical module programmer can automate firmware reading and writing in batches, save firmware as, etc. It can completely replace and completely surpass all its functions.

ascentoptics Transceiver Programmer US$200.00++

Programmer is a small metal box that can read or write the internal memory EEPROM of the SFP, SFP+, SFP28, XFP, QSFP and QSFP28 pluggable optical modules and display the details of the EEPROM (such as the Part Number, Vendor Name, description and range).Program board is hardware board for transceivers in form factor of SFP, SFP+, QSFP+, QSFP28, XFP etc.

Country Of Origin : China

Delivery Time : 1 -3 Days after PO Confirm

Dimensions (LxWxH ) : 174.2*139.1*25.5

Net weight : 0.034kg


Part No.		Description	Specifications				Datasheet
Part No.		Description	Module Supported	Operating Systems	Input Voltage	Connector	Datasheet
	EPBD-SXQ-UF	SFP XFP QSFP QSFP28 PROGRAM BOARD VF	SFP, SFP+, SFP28, QSFP+,QSFP28	Windows 7or 10, Mac OS (10.13 or newer)	5V	USB 3.0	Download
	EPBD-SXQ-UT	SFP XFP QSFP QSFP28 PROGRAM BOARD VT	SFP, SFP+, SFP28, QSFP+,QSFP28	Windows 7or 10, Mac OS (10.13 or newer)	5V	USB 3.0	Download
	EPBD-SXQ-UA	SFP XFP QSFP QSFP28 PROGRAM BOARD Auto-Write VA	SFP, SFP+, SFP28, QSFP+,QSFP28	Windows 7or 10, Mac OS (10.13 or newer)	5V	USB 3.0	Download
	EPBX-SXQ-UA	SFP XFP QSFP QSFP28 PROGRAM Box Auto-Write VA	SFP, SFP+, SFP28, QSFP+,QSFP28	Windows 7or 10, Mac OS (10.13 or newer)	5V	USB 3.0	Download

SFP XFP QSFP QSFP28 PROGRAM Box Auto-Write VA

2023-05-05 14:52:14

SFP XFP QSFP QSFP28 PROGRAM BOARD VF

2023-05-05 14:52:13

SFP XFP QSFP QSFP28 PROGRAM BOARD VT

2023-05-05 14:52:13

SFP XFP QSFP QSFP28 PROGRAM BOARD Auto-Write VA

2023-05-05 14:52:13

Programmer is a small metal box that can read or write the internal memory EEPROM of the SFP, SFP+, SFP28, XFP, QSFP and QSFP28 pluggable optical modules and display the details of the

fibermarkt Comparative evaluation of transceiver module programmer

Thu, 14 Nov 2024 14:43:22 +0800

IICHIB-X2 Transceiver ProgrammerUS$100.00

LightBoard used to change the compatibility of SFP/ SFP+/ SFP28/ QSFP+/ QSFP28 transceivers DAC AOC €352.80

LB - LightBoard mobile programmer for SFP/ SFP+/ SFP28/QSFP+/ QSFP28 optical modules and DAC/AOC cables.
- It has a friendly and intuitive interface.
- Free and perpetual License.
- The device runs in the “cloud”, so it is continuously updated with new hardware versions, new interfaces, so it does not require constant updates.

Designed for programming DAC modules and cables from manufacturer LightOptics only.

LightBoard - mobile programmer for LightOptics SFP, SFP+, XFP, SFP28, QSFP+ 40G, QSFP28 100G optical modules.

With the LightBoard programmer model LB 2 from the manufacturer LightOptics, you can program and reprogram optical modules and DAC cables ONLY from the manufacturer LightOptics.

How does the programmer work ?

Lightboard allows changing the compatibility of LightOptics manufacturer's optical modules, ensuring that they work with almost any equipment vendor. It allows you to adapt SFP, SFP+, SFP28, QSFP+, QSFP28 and DAC transceivers to various network devices such as switches, converters, network/server cards, etc. All you need to do is connect the module to the programmer, select the appropriate settings and you're done! The process is simple and fast, so even people without specialized knowledge can use it.

The current version of the eLO SFP app can be downloaded at the link (link to the app). Also available as a phone version in the Play Store and AppStore.

Brief technical specifications of the programmer:

Supported module types: SFP, SFP+, SFP28, QSFP, QSFP28, DAC, AOC
Interface: USB for connection to computer
Support for operating systems: Windows, macOS, Linux

Basic Functions of Insert Programmer (transceivers):

Programming fiber optic modules to work with equipment from manufacturers such as Alcatel, Allied Telesis, Broadcom, Cisco, DCN, Dell, D-Link, Extreme Networks, Fortinet, Hirschmann, Huawei, Intel, Juniper, Mellanox, Mikrotik, Moxa, Netgear, Palo Alto, QNAP, TP-Link, Ubiquiti, ZTE, Zyxel, among others, and other network equipment prodcents.
Supported transceiver formats: SFP (1GbE and 100Mbs), SFP+ (10GbE), SFP28 (25/10GbE), QSFP+ (40GbE), QSFP28 (100GbE)
Programming of DAC cables (10G, 25G, 40G and 100G) and AOC cables. Each end of the cable is programmed individually, so the DAC cable can be used to connect devices (switches, server cards) from different manufacturers, e.g. Cisco with Huawei, Mikrotik with Intel, Dell with QNAP, Mellanox with Juniper, etc
Multiple optical module programming. SFP+ 10G LR module programmed today to Juniper tomorrow can be reprogrammed to MikroTik and reapplied in the next link.
Checking what manufacturer the cartridge has been programmed to,
Configuration from a computer or phone with Android or IOS thanks to the app eLO SFP
(The eLO SFP app can be downloaded from the Attachments section or the Play Store and App Store.Install the eLO SFP app on your phone, use the phone's camera to scan the barcode. The app will tell you what manufacturer the fiber optic insert is programmed for)
Free License, which we allocate once at the time of purchase, without any additional fees and is perpetual.
The device runs in the “cloud”, so it is constantly updated with new versions of hardware, new interfaces, so it does not require constant updates.
Simple operation in 2 clicks - just place the optical module in the programmer, select from the list the manufacturer of the switch/card manufacturer in which the insert will be installed and save the software with the “WRITE” button

With the LightBoard coding tool for optical transceivers and DAC/AOC cables:

Adapt LightOptics optical modules to work seamlessly with nearly any network device on the market, ensuring broad compatibility.
Optimize your inventory by reducing duplicate module types—one programmable module can be configured to meet various requirements.
Flexible ordering: no need to specify the exact equipment type at the time of purchase; you can program the module yourself just before installation.
Access remote support when needed, with professional service assistance available on demand.
Quickly reprogram optical transceivers to match new devices or firmware updates, allowing for adjustments as network needs evolve.

The LightBoard programmer from LightOptics offers a user-friendly and intuitive interface, enabling fast reconfiguration of optical transceivers in just a few seconds.

Set contents:

LB 2 programmer
power supply
USB cable
Bag/case

Quick Start Guide:

Download and install the programmer's application from the official website on an Internet-enabled computer.
Connect the programmer to a power source.
Attach the programmer to the computer using a USB cable or connect via wireless technology.
Turn on the programmer and start the installed application.
Insert the module and wait about 30 seconds for the device to recognize it.
Select the software from the list, choosing the manufacturer where the module will be installed.
Press the “WRITE” button and wait until the process completes (100%).
Verify that the module functions correctly within the switch.

Current APPLICATION for LB_2 programmer ->APPLICATION 2.6.3

reveltronics Comparative evaluation of transceiver module programmer

Thu, 14 Nov 2024 14:38:40 +0800

IICHIB-X2 Transceiver ProgrammerUS$100.00

reveltronics Transceiver Programmer US$300.00++

Transceivers Programming Tools for SFP QSFP XFP and OSFP

Programming optical transceivers requires Transceiver Adapter and REVELPROG-IS programmer. Transceiver Adapter is a hardware board for transceivers in form factor of SFP / QSFP / OSFP / XFP and REVELPROG-IS is programming tool which allows for reading and writing internal memory of these modules.

We offer few adapter boards for transceiver coding depends on user needs. The simplest one is SFP Adapter which has single connector (without cage) just for SFP/SFP+ modules. The most popular SFP QSFP XFP Adapter has in total 3 connectors compatible with SFP, SFP+, SFP28, SFP112, QSFP, QSFP+, QSFP28 and XFP form factors. Latest SFP-DD QSFP-DD OSFP Adapter supports also DoubleDensity modules (SFP-DD and QSFP-DD), old XFP standard is replaced with newer OSFP connector and USB-B is replaced with USB-C so it can deliver more current to transceivers with higher power class. In two last adapters all logic signals from sockets are connected to external pins which allows e.g. enable TX/RX optics, configure hardware speed, force hardware reset etc. Additionaly all 3 sockets are equipped with metal cages.

Each adapter requires power supply connection (via USB) and external programmer in order to reprogram internal memory. REVELPROG-IS is serial programmer and allows also programming optical transceivers in MSA Standard, e.g. SFF-8472 (SFP / SFP+), SFF-8436 / SFF-8636 (QSFP / QSFP+ / QSFP28), INF-8077i (XFP) or latest CMIS specification (SFP+, SFP-DD, QSFP+, QSFP-DD and OSFP modules). Special features allows to enter manufacturer / host password and program write protected transceivers, brute force password (searching password for protected transceivers with unknown password), change manufacturer info, model, serial number etc. and recalculate checksums directly from REVELPROG-IS application. In paged transceivers (with additional pages in internal memory) there is possibility to access to any memory area just by switching banks/pages in user interface. Please check example video of using REVELPROG-IS programmer with one of the adapter boards:

Features:

read/write optical transceivers:
- SFP [A0] and SFP [A2] read/erase/write/verify of A0h and A2h blocks of SFP/SFP+ Transceivers
- SFP, SFP-DD, QSFP, QSFP-DD, XFP and OSFP read/erase/write of any block or page in memory map of OSFP, SFP/SFP+/SFP28/SFP112, SFP-DD/SFP-DD112, QSFP/QSFP+/QSFP28, QSFP-DD/QSFP-DD800 or XFP transceivers (verification should be done by user because some bytes are diagnostics or read only). This mode is using REVELPROG-IS custom script tool to read/write specific part of memory
supports MSA Standard (e.g. SFF-8472, SFF-8636, SFF-DD MIS, INF-8077i and CMIS)
supports unprotected and write protected transceivers (with password)
dedicated tools for transceivers: enter password, change password, brute-force password, change vendor information, checksum calculation etc.
additional useful tools such as: user patterns, custom script tool (i2c bus pirate), auto backups, diff checker (file compare tool) etc.

Software:

REVELPROG-IS Software is compatible with MS Windows 7, 8, 10 and 11 (32 and 64-bit). Please check REVELPROG-IS Software for more details.

Manuals and tutorials:

Please note: transceiver adapter and REVELPROG-IS are required for operation:

REVELPROG-IS programmer at REVELTRONICS's store
SFP Adapter or SFP QSFP XFP Adapter or SFP-DD QSFP-DD OSFP Adapter at REVELTRONICS's store

prooptix Comparative evaluation of transceiver module programmer

Thu, 14 Nov 2024 14:33:42 +0800

IICHIB-X2 Transceiver ProgrammerUS$50.00

prooptix Transceiver Programmer US$400.00++

Simplify Optical Transceiver Programming and Tuning with the Pro Optix Pro Coder

Compact and easy-to-use, the Pro Optix Pro Coder is used for transcoding transceivers and changing channels on tunable DWDM transceivers. Available to Pro Optix resellers and customers and suitable for use in data centers and networks, the Pro Coder gives installers and technicians incredible flexibility. The Pro Coder offers SFP programming, but also other form factors, with the latest edition including QSFP+ programming.

The Pro Coder is ideal for checking compatibility of transceivers in specific applications and handy for diagnosing problems in the field, enabling you to make adjustments and re-tune quickly on site.

It also gives the possibility of remote support, effectively connecting you and the Pro Optix technical support team where needed, or maybe your own internal support team.

ptical Transceiver Programmer and Coder

With the Pro Optix Pro Coder, you can configure Pro Optix optical transceivers in a matter of seconds. It is simple to use and to find the right code and settings from our up-to-date online database. All codes and settings are fully tested to ensure compatibility, so that you can recode your transceiver quickly to meet your specific application requirements.

DWDM Transceiver Wavelength Tuning

Also used for tuning DWDM transceiver channels, the Pro Coder is designed to help make quick adjustments to SFP, SFP+ and XFP tunable transceiver wavelengths.

Specifications

Quick and easy recoding of transceivers
Provides flexibility & lower cost
Easy-to-use online recoding service
Compatible and quality assured
Change channel on tunable DWDM transceivers
Remote Diagnostics and Manual Recoding

Recode Transceivers: SFP | CSFP | SFP+ | SFP28 | XFP | QSFP+ | QSFP28 | QSFP-DD
Recoding to support most network vendors: Alcatel-Lucent, Arista, Brocade, Cisco, Dell, HP, Huawei, Intel, Juniper

SFP, QSFP+ and other form factors supported

Transceivers have different coding algorithms and it is important to have the correct coding for transceivers to make sure that they are recognized by the networking equipment being used and are fully compatible with other brands you may be using. If the transceiver is incorrectly coded it can result in hardware alarms showing that the transceiver is not approved or that the transceiver is not compatible with the other networking equipment.

The Pro Optix Pro Coder optical transceiver programmer supports Pro Optix transceivers in accordance with the Multi-Source Agreement (MSA) ensuring full transceiver compatibility for a wide range of form factors (SFP, CSFP, SFP+, SFP28, XFP, QSFP+, QSFP28, QSFP-DD) and many different brands. Our database of transceivers is available to Pro Optix resellers and end-customers, is kept up-to-date with the latest form factors and can be used as a QSFP+ programmer.

Visit the customer portal for a full list of transceivers >

See our range of DWDM tunable transceivers >

Start using the Pro Coder in 3 simple steps

Download the
Pro Coder Software

Connect the Pro Coder to your PC via USB and install drivers automatically
Download the Pro Coder Software here and click “Install”

Insert Transceiver
and Configure

Insert the transceiver into the Pro Coder
Select “Recoding” or “Tuning”
Select the correct code from the list or tune to one of the wavelengths provided.

Transceiver Ready
for Use

After configuring, you are ready to connect your transceiver
Any questions? Then give us a call or complete the form below

Pro Coder Prerequisites: Computer running Windows 8.1 or later with 1 USB port available and connected to the Internet

FS BOX V4 Comparative evaluation of transceiver module programmer

Thu, 14 Nov 2024 14:27:58 +0800

IICHIB-X2 Transceiver ProgrammerUS$75.00

FS BOX V4, Multi-Functional Transceiver Tool Kit, Support FS Transceivers & DAC/AOC Cables, Yellow

US$499.00

Transceiver Tool Kit for FS Transceivers & DAC/AOC Cables, Yellow

FS BOX V4 only works with FS Transceivers & DAC/AOC Cables. It is designed to achieve multiple functions such as online configuration, diagnosing and troubleshooting, wavelength tuning for tunable transceivers, box pro, and so on. The FS BOX V4 has a built-in lithium battery and can also support Bluetooth connectivity. With its instant online platform airmodule.fs.com and a wide range of configuration choices, engineers could configure in a timely and effective way.

Please notice that HPE compatible SFP+/SFP28/XFP/QSFP+/QSFP28/QSFP-DD transceivers, all the 40G BiDi transceivers, and 25G SFP28 Loopback Module are currently not supported by FS Box to reconfigure due to hardware restriction. Any attempt may cause irreversible damage to your transceivers.

Specifications

Part Number

FSBOX-V4

Supported Form Factors

SFP, SFP+, SFP28, XFP, QSFP+, QSFP28, QSFP-DD

Supported Operating Systems

Windows (10 or newer), Mac OS (10.13 or newer), Android (5.0 or newer), IOS (11.0 or newer)

Supported Browsers

Chrome (68 or newer)

Connector

USB Type-C

Input Voltage

Color

Yellow

Case Material

Rubber, Polycarbonate

Dimensions (HxWxD)

1.13''x2.89''x6.30'' (28.7x73.5x160mm）

Weight

0.2Kg

eatures

Intelligent Transceiver Tool Kit

Solves the real-time compatibility requirements, upgrade the transceiver firmware (including part number, serial number, etc.) to make it compatible with the upgraded switches.

Compatibility Configuration

Support 200+ vendors such as Cisco/ Juniper/ Brocade

New Form Factor

Support SFP / SFP+ / SFP28 / XFP / QSFP+ / QSFP28 / QSFP-DD

Lithium-ion Battery

Support Lithium-ion batteries for independent power supply

Multiple Connection Methods

The FS BOX now supports both USB and Bluetooth connections and can be configured anytime, anywhere.

Wired Connection

Wireless Connection

FS BOX V3 Comparative evaluation of transceiver module programmer

Thu, 14 Nov 2024 13:42:55 +0800

IICHIB-X2 Transceiver ProgrammerUS$50.00

Multi-Functional FS BOX V3- Transceiver Programmer US$299.00

Transceiver Tool Kit for FS Transceivers & DAC/AOC Cables

FS BOX V3 only works with FS Transceivers & DAC/AOC Cables. It is designed to achieve multiple functions such as online configuration, diagnosing and troubleshooting, wavelength tuning for tunable transceivers, box pro, and so on. With its instant online platform airmodule.fs.com and a wide range of configuration choices, engineers could configure in a timely and effective way.

Please notice that HPE compatible SFP+/SFP28/XFP/QSFP+/QSFP28 transceivers, all the 40G BiDi transceivers, and the 25G SFP28 Loopback Module are currently not supported by FS Box to reconfigure due to hardware restriction. Any attempt may cause irreversible damage to your transceivers.

Multi-Functional FS BOX V3

Massive Vendors, Strict Compatibility Test

• Configure FS Transceiver to work with devices of 200+ vendors
• Each of configure file has been strictly tested by transceivers and brand equipments.

Monitor and Troubleshooting

• Without other devices, just connect to the cloud platform
• Monitor inserted transceiver's voltage, temp, bias current value, TX and RX power

Diagnosing Configuration

• Diagnose configuration file of the FS transceiver
• Reconfigure problematic transceiver

Wavelength Tuning for Tunable DWDM

• Identify whether the inserted transceiver is a tunable transceiver
• Configure channels for transceiver from C19.5 to C60.5 (1561.83-1529.16nm).

Upgraded V3 for Better User Experience

Optical module programmer multi-manufacturer comparison evaluation

Wed, 06 Nov 2024 09:12:52 +0800

sfptotal https://sfptotal.io
QT-SFP-BOX-TOOL QSFPTEK box

EDGE Programmer Board

prooptix_Programmer

OpticalProgrammer

REVELTRONICS

AscentOptics :SFP XFP QSFP QSFP28 PROGRAM Box Auto-Write VA

Dimiks Programmer
LIGHTBOARD USED TO CHANGE THE COMPATIBILITY OF SFP/ SFP+/ SFP28/ QSFP+/ QSFP28 TRANSCEIVERS DAC AOC

FLEXSOX – QSFP-DD and OSFP Add-on for FLEXBOX V4